长春电动叉车和电瓶不配套会有哪些影响？

电动叉车电池容量来确定工作时间,在购买的时候,需要确认叉车的容量,与大,充电器充电时间可能会延长或充进电,大部分时间由于缺乏知识,认为叉车电池容量更大,越好,但随着电池充电电流的配套,在电池的选择,需要与相应的叉车充电机和安装尺寸相匹配，根据使用的大小或条件酌情选择适合的点和容量的蓄电池。
electric forklift battery capacity to determine the working time, when purchasing, need to confirm the capacity of forklift, large, charger charging time may be extended or charged, most of the time due to lack of expertise, that forklift battery capacity is larger, the better, but with the battery charging current matching, in the battery selection, need to be corresponding. the forklift charger and installation size match, according to the size or conditions of use, choose the appropriate point and capacity of the battery.
叉车的使用过程中电机、电池输出电流比较大,如果有一个电池充电能力要求不一致的引擎,如果电池充电容量小,在电池时的起动电阻在一种强烈的放电状态,导致内部活性物质与硫酸反应,让电池温度上升,板变形由于负载过载,结果将不可避免地使剥落的活性物质,造成极板早期损坏，大大缩短了电池的使用寿命;如果电池充电的电池更大,尽管这些问题不应该发生,但是很难充分发挥其内部活性物质,使电池的效率降低,因此,蓄电池在使用过程中,电池需要先收取配置电动机的供给和需求,适当的叉车电池容量太小,所以在等商品重量的情况下,板承受不起太多的电流,充电也是同样的方式，导致电池板损坏。
during the use of forklift trucks, the output current of motors and batteries is relatively large. if there is an engine with inconsistent battery charging capacity, if the battery charging capacity is small, the starting resistance of the battery is in a strong discharge state, which leads to the reaction of internal active substances with sulfuric acid, which causes the temperature of the battery to rise, and the plate deformation due to overload. if the battery charged is bigger, although these problems should not occur, it is difficult to give full play to its internal active substances and reduce the efficiency of the battery. therefore, in the process of using the battery, the battery needs to be first. the appropriate forklift battery capacity is too small to withstand too much current under the condition of equal commodity weight. charging is the same way, which leads to the damage of the battery plate.