in the transportation industry, forklift is a very important material handling equipment, the safety of its working state is very important. forklift is very important for the new use of forklift. in some special cases, forklift leasing needs to pay attention to the following aspects:
for the new forklift, they need to go through strict factory inspection. in the process of leasing, storage and transportation of forklift, all parts of forklift may be loose or damaged. therefore, carefully check the forklift before use: check the mechanical connection limit of forklift, especially the limitation and correctness of steering system and tire, lifting mechanism, etc.; check the lubrication of forklift engine or dc motor, and add enough oil according to the lubrication points of forklift gear oil and lubricating oil, check whether the joints, lines and lighting of electrical components are in good condition and well connected; check whether the tire pressure meets the requirements, and whether the tools and accessories are complete. i would like to remind you that at the beginning of use, the rough surface of the parts has not been completely polished, so there is a certain deviation between the processed shape and the assembly position, and there will be a certain gap between the clearance and the lubrication conditions.
forklift rental, new forklift is a certain period of running in. generally speaking, the running in period of new forklift is 500 km. considering that some forklifts have no odometer, the running in period can also be set as 4 months or 500 hours. due to the tight matching, the moving parts of the engine can not move normally, so the running in period needs to be adjusted higher. the internal combustion engine forklift truck should check the quality and quantity of oil in the engine and fuel injection pump. the oil can be changed once after the running in period.
1、 the driver who has been trained and holds a driver's license can drive; 2. check all control and alarm devices before starting, if there is any damage or defect, it should be operated after repair; 3. during the loading and unloading process, the goods should not exceed the specified weight, the fork should be completely inserted under the goods, the goods should be evenly placed on the fork, and the tips of the single fork should not be used to pick up the goods; 4 start, turn, drive, brake and stop smoothly on the smooth road, and slow down; drive carefully when driving on the ramp. when driving on a slope which is more than one tenth of the slope, it drives forward when going up the slope and backward when going down the slope. don't turn when you go uphill or downhill. the forklift truck shall not be loaded and unloaded when driving; when driving, pay attention to pedestrians, obstacles and potholes, and pay attention to the gap above the forklift; do not operate vehicles and accessories outside the driver's seat; pay attention to the falling of the goods above and take protective measures when necessary; when working, try to make the gantry tilt forward and backward in a small range;